Bakalářská práce řeší funkčnost kovové licí formy pro zvýraznění procesu segregace vybraných podeutektických slitin typu Al-Si legovaných předslitinou typu AlCoCrNi. Byly vybrány tři slitiny: AlSi7Mg0,3, AlSi7, AlSi10,5Cu1,2Mn0,8Ni1,2. Práce je rozdělena do dvou hlavních částí. První část (teoretická) se zabývá převážně problematikou Al-Si slitin, krystalizací, segregací, modifikováním, očkováním a měřením tvrdosti. Druhá část (praktická) se zabývá celým procesem přípravy slitin, předslitin, odlitím do speciální kovové formy s rozdílnou výškou kanálů/dutin, přípravou vzorků a jejich následnou analýzou pomocí optického mikroskopu a elektronového mikroskopu. Bylo analyzováno chemické složení odlitků ze speciální formy, velikost dendritů pomocí metody DAS a měření mikrotvrdosti tuhého roztoku hliníku dle Vickerse. Metalografických výbrusů bylo celkem 36, od každé slitiny 12. Vzorky byly odebrány z každého ze šesti kanálů/dutin vždy z horní části a ze spodní části odlitku. Nakonec došlo k vyhodnocení, porovnání dat a závěr.
Anotace v angličtině
The bachelor thesis deals with the functionality of a metal casting mould for highlighting the segregation process of selected hypoeutectic alloys of the Al-Si type alloyed with AlCoCrNi pre-alloy. Three alloys were selected: AlSi7Mg0.3, AlSi7, AlSi10.5Cu1.2Mn0.8Ni1.2. The work is divided into two main parts. The first part (theoretical) deals mainly with the problems of Al-Si alloys, crystallization, segregation, modification, grafting and hardness measurement. The second part (practical) deals with the whole process of preparation of alloys, pre-alloys, casting into a special metal mould with different channels/cavity height, preparation of samples and their subsequent analysis using optical microscope and electron microscope. The chemical composition of the castings from the special mould, the size of the dendrites using the DAS method and the microhardness measurement of the solid aluminium solution according to Vickers were analysed. A total of 36 metallographic cuttings were made, 12 from each alloy. Samples were taken from each of the six channels/cavities from the upper and lower parts of the casting each time. Finally, the data was evaluated, compared and concluded.
Klíčová slova
segregace, DAS, mikrostruktura, mikrotvrdost, licí forma, Al-Si slitiny
Bakalářská práce řeší funkčnost kovové licí formy pro zvýraznění procesu segregace vybraných podeutektických slitin typu Al-Si legovaných předslitinou typu AlCoCrNi. Byly vybrány tři slitiny: AlSi7Mg0,3, AlSi7, AlSi10,5Cu1,2Mn0,8Ni1,2. Práce je rozdělena do dvou hlavních částí. První část (teoretická) se zabývá převážně problematikou Al-Si slitin, krystalizací, segregací, modifikováním, očkováním a měřením tvrdosti. Druhá část (praktická) se zabývá celým procesem přípravy slitin, předslitin, odlitím do speciální kovové formy s rozdílnou výškou kanálů/dutin, přípravou vzorků a jejich následnou analýzou pomocí optického mikroskopu a elektronového mikroskopu. Bylo analyzováno chemické složení odlitků ze speciální formy, velikost dendritů pomocí metody DAS a měření mikrotvrdosti tuhého roztoku hliníku dle Vickerse. Metalografických výbrusů bylo celkem 36, od každé slitiny 12. Vzorky byly odebrány z každého ze šesti kanálů/dutin vždy z horní části a ze spodní části odlitku. Nakonec došlo k vyhodnocení, porovnání dat a závěr.
Anotace v angličtině
The bachelor thesis deals with the functionality of a metal casting mould for highlighting the segregation process of selected hypoeutectic alloys of the Al-Si type alloyed with AlCoCrNi pre-alloy. Three alloys were selected: AlSi7Mg0.3, AlSi7, AlSi10.5Cu1.2Mn0.8Ni1.2. The work is divided into two main parts. The first part (theoretical) deals mainly with the problems of Al-Si alloys, crystallization, segregation, modification, grafting and hardness measurement. The second part (practical) deals with the whole process of preparation of alloys, pre-alloys, casting into a special metal mould with different channels/cavity height, preparation of samples and their subsequent analysis using optical microscope and electron microscope. The chemical composition of the castings from the special mould, the size of the dendrites using the DAS method and the microhardness measurement of the solid aluminium solution according to Vickers were analysed. A total of 36 metallographic cuttings were made, 12 from each alloy. Samples were taken from each of the six channels/cavities from the upper and lower parts of the casting each time. Finally, the data was evaluated, compared and concluded.
Klíčová slova
segregace, DAS, mikrostruktura, mikrotvrdost, licí forma, Al-Si slitiny